Back to top

2005 Beneteau Oceanis Clipper 373

Marathon, Florida

$119,900

~2005 Beneteau 373 w/ Yanmar 3JH4E~

~Garmin Electronics!

~New Main Sail !

~Unknown hours
~Sails are 6 yo
~Spinnaker included
~6 year old rigging
~3 yo bottom paint
~Autopilot 
~A/c new
~Inverter new

~TURN KEY! WATER READY!!~

  

Basic Boat Info

Make: Beneteau
Model: Oceanis Clipper 373
Year: 2005
Condition: Used
Category: Sail
Designer: Berret - Racoupeau
Construction: Fiberglass
Boat Hull ID: BEYN5069J405
Has Hull ID: Yes
Keel Type: Other Keel

Dimensions

Length: 37 ft
Length Overall: 37 ft
Beam: 12'3 ft
Dry Weight: 14550.49 lb

Engines / Speed

Engines: 1
  • Make: Yanmar
  • Model: 3JH4E
  • Type: Inboard

Tanks

Fuel Tank Capacity: 33 gal
Water Tank Capacity: 95 gal

Other

Boat Class: Cruisers

Contact

Miami Master
All Florida Yacht Sales

Office

All Florida Yacht Sales
18211 SW 95th Court
Palmetto Bay, FL, US, 33157
Tel:(305) 562-1258
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


Sail Area

I : 44.72 ft
J : 13.91 ft
P : 41.01 ft
E : 14.44 ft
Working Sail Area : 721.94 sq ft
Manufacturer Provided Description
The designers have managed to blend volume, comfort, high performance and elegance. The slender hull, well-balanced sail plan and the standard deep keel, enhance upwind performance, give directional stability and helm balance when heeled. The new split-level deck layout of the Ocýýanis 373 combines greater headroom with fluid aesthetics. The cockpit is very spacious and ergonomic. The cunningly designed removable helmsman's seat simplifies access to the bathing platform, whilst the removable door step makes the companionway very practical. Unrivalled circulation is possible thanks to the brand-new,patented, steering wheel, which can be swiveled out of the way to clear the cockpit, still leaving all the instruments on the helm pedestal.
Additional Description
- PERFORMANCE Pack (optional) - ? Fully battened performance mainsail with roller cars. ? Belly compensating jib (foam layer to middle of luff allowing the jib to furl better, and giving the jib a flatter belly when partially furled). Anti-UV strip to jib. ? Low stretch halyards. ? H43.2STC genoa sheet winches in place of H44.2STC winches. ? Folding 3-blade propeller. - NAV PACK (optional): Nav Pack n°3 - ? In the cockpit: ST60 Wind instrument linked to masthead windvane anemometer, with cable and junction box at foot of mast. Raymarine ST 60 Tridata instrument (log, speed and depth sounder, with transducers). Raymarine ST6001 autopilot (controller, computer, helm drive and cable). ? On steering console in cockpit: Raymarine C70 LCD GPS chart plotter with colour 6.5? screen and Navionics Gold cartography. - Exclusive PACK (optional) - ? Nav Pack n°3. ? Large sprayhood in ?Captain blue? with 2 stainless steel frames, or bimini. ? H40.2STC winch to port in place of H32.2STC winch. ? Hot and cold cockpit shower. ? Waterproof speakers in cockpit. ? GRP cockpit table.
Additional Description
? Pivoting helm seat allows easy access to bathing platform. (Bénéteau patent.) ? 2 side cockpit lockers fitted with wood shelves (for liferaft stowage). ? 2 aft cockpit lockers. ? 1 separate, watertight gas locker. ? 2 teak-slatted helm benches at each side of cockpit. ? All cockpit benches are teak-slatted. ? A steering wheel console takes navigation instruments. (The instruments are an option.) ? Steering compass on console. ? Control lever to starboard cockpit coaming. ? 12V cigarette lighter socket on console. ? Handrail. ? Cup holder. ? Folding varnished wood cockpit table fixed to steering console. ? Manual bilge pump.
Additional Description
2 and 3 cabin options available.
Additional Description
Electrical panel: ? 12-switch 12V electrical panel plus 3 x 220V switches. ? Cigarette lighter socket. ? Double protection to electrical panel, differential circuit breaker and bi-polar temperature magneto for 220V circuit and 12V magneto temperature circuit breaker. Supply: The 12V electrical circuit is supplied by: ? One 110 Amp service battery. ? One 70 Amp engine battery. Resource management indicators: ? Voltmeter. ? Battery charge warning light. Battery charging: ? Battery charging by engine alternator or 220V ? 20 Amp shore supply. Lights: ? Approved navigation lights. ? Bow and stern navigation lights. ? Steaming light (masthead light). ? Anchor light.
Additional Description
? Headroom: 1.98m. ? A functional space: ? Laminated work surface with moulded wood fiddle. ? Stainless steel double sink. ? Mixer tap with hot and cold pressurised water. ? Chopping board. ? Gimballed gas two-burner hob and oven with protective stainless steel safety rail. ? 110L top opening, foam insulated icebox, with plastic baskets. ? Second front opening, foam insulated icebox (70L), fitted with refrigerating plate, baskets and shelves (only available with 2-cabin layout). ? Seawater foot pump and icebox drainage. ? 220 V socket. ? Ample stowage: - Stowage with hinged doors under hob. - Cutlery drawer. - 4 storage shelves with doors along the hull. - Stowage under sink. - Waste bin under sink. ? Neon light over hob. ? 2 deckhead lights: 1 over sink and 1 over hob. ? T4 opening port with curtains over hob for good ventilation. ? 8 place settings.
Additional Description
? Engine compartment with foam sound-proofing. ? Engine control panel with rev counter and alarms to starboard cockpit coaming. ? Stainless steel propeller shaft with GRP protection moulded into the hull. ? Fixed two- or three- blade propeller according to engine. ? Engine mounting built into the inner mould. ? Rotomoulded 115L diesel tank aft, fitted with electronic gauge. ? Saltwater and diesel filters with sediment reservoirs.
Additional Description
The hull is single-skinned GRP construction. Reinforced points (keel, rudder, chain plates, hull-deck joint) help to strengthen the structure. A structural inner moulding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (shroud chainplate tie rods, keel, rudder, etc.), and spreads any loads guaranteeing reduced strain on the hull. The surface material of the inner moulding makes cleaning easier and provides a better finish. The standard hull colour is white with blue and gold decoration. Steel Blue is available as an option.
Additional Description
The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio and excellent thermal and sound insulation. A ?diamond point? non-slip surface increases safety over all areas of movement on deck. - MOORING AND ANCHORING - ? Stainless steel bow fitting with offset roller to allow anchor stowage under way. ? 2 roller fairleads amidships. ? 2 roller fairleads and 2 x 300mm aluminium mooring cleats at the stern and 2 x 300mm aluminium mooring cleats at the bow. ? Main anchoring kit with 16 kg anchor, 20m chain and 38m warp. (4 mooring lines and 6 white fenders). ? Vertical 800watt 12V electric windlass, with watertight relay casing, with on-deck up and down control switches for easy anchoring. ? Self-draining anchor well with clinch fitting. - BATHING PLATFORM AND TRANSOM - ? Transom with teak covered bathing platform. ? Stainless steel bathing ladder with teak treads. ? Outboard motor bracket. ? Protective rubber rubbing strake to transom. ? Cold water cockpit shower.
Additional Description
CE Certification: A8/B8/C12 (pending ratification)
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information
Jose Perez Valdivia
305-504-1868
Jose@afys.com